Safety; General; Introduction - SANY SPR160C-8 Operation And Maintenance Manual

SPR160/200C-8 Pneumatic Tire Roller

Safety

2.Safety

2.1 General

2.1.1 Introduction

Operation and Maintenance Manua
This l is a guide for you to operate your equipment properly.
It contains technical and safety information necessary for operation of your equipment. Read and
understand each section of the manual.
Always operate your equipment according to national, provincial, prefectural and municipal laws
and regulations. The operation safety information and description in this manual are just sugges-
tive and attentive.
SANY cannot anticipate every possible circumstance that might involve a potential hazard during
operation and maintenance. The Safety messages in this manual and on the product are, there-
fore, not all inclusive. If a procedure, work method or operating technique that is not specifically
recommended in this manual is used, you must be sure that it is safe for you and for others. You
should also ensure that the product will not be damaged or be made unsafe by the operation, lubri-
cation, maintenance or repair procedures that you choose.
The equipment must not be towed.
Equipment covered by this manual is used for various operations under normal conditions.
Never use the equipment in flammable or explosive environment, or in areas containing asbestos
dust.
Select a SANY pneumatic tire roller with a configuration suitable for high-plateau operation when
operating in areas 2000 meters above the sea level.
The information, specifications, and illustration in this publication are on the basis of information
that was available at the time that the publication was written. SANY reserves the right to change
these information at any time without prior notice. Consult SANY dealer to obtain the latest infor-
mation or if you have any question on the information provided in this manual.
Operation and Maintenance Manual-Oct. 2018 2-3