Machine Information - SANY STG190C-8S Safety, Operation And Maintenance Manual

Introduction
•
Preheat the machine before performing any operations.
•
Avoid operating or running the machine at a high speed in overload working conditions.
•
Avoid sudden starting, rapid movement or abrupt stop of the machine.
•
Cool down the machine system at the end of every working day.

1.3.3 Machine Information

The factory numbers (serial numbers) and models on the nameplate are important information re-
quired for ordering replacement parts or requiring assistance for your machine. So please write
down the related information in this manual for further use
Information" on page
The nameplate is riveted on the left side of the front frame, see below figure.
Fig 1-3
1-6
1-7).
Safety, Operation and Maintenance Manual-March 2021
STG190C-8S Motor Grader
(see:"Serial Number and Distributor