Intended Use; Unintended Use; Requirements Of Working Environment - SANY STG190C-8S Safety, Operation And Maintenance Manual

Safety
•
If the amount of fuel added, content of par-
ticulates ,or latitude is beyond the specifica-
tion of this type of equipment, damage
could occur and the warranty of your equip-
ment would become invalid.
The manual should be kept in the cab all
the time for operator to refer to at any time.
Contact Sany dealer to obtain a new man-
ual if the original one is missing or cannot
be read.

2.1.2 Intended Use

The equipment is mainly designed for the following operations.
•
Clearing the foundation, fine leveling the cracked old roads or hard grounds, scraping slopes, re-
finishing, mixture paving, collecting and compacting materials.
•
Removing ice and snow.

2.1.3 Unintended Use

If the motor grader is used for other purposes or under environments with potential hazards, such
as in areas like anoxic plateaus, inflammable or explosive environment, or areas with asbestos
dust, special safety regulations should be obeyed, and the machine must be equipped with devi-
ces applicable to corresponding purposes.

2.1.4 Requirements of Working Environment

The requirements of working environment for standard graders are as follows:
•
Working altitute:≤2000m
•
Working temperature:
-10℃ ~ 40℃ (standard configuration)
•
Optional: air inlet preheating system (-20℃ ~40℃ )
2-4 Safety, Operation and Maintenance Manual-March 2021
STG190C-8S Motor Grader