Your Sany Machine; Machine Directions; Breaking In A New Machine - SANY STG190C-8S Safety, Operation And Maintenance Manual

STG190C-8S Motor Grader Introduction
5. Maintenance
This section provides all general maintenance and repair procedures. It is important to study and
become familiar with all the maintenance and repair procedures before performing any mainte-
nance or repair operations on the machine.
6. Troubleshooting
This section outlines common malfunctions and fault diagnostic procedures for the operating sys-
tem. Basic mechanical, hydraulic and electrical system troubleshooting is included.
7. Technical specifications
This section provides the basic performance parameters of this machine.
Some information may change as design modification.

1.3 Your Sany Machine

1.3.1 Machine Directions

D
A
B
C
Fig 1-2
A. Front B. Back C. Left D. Right

1.3.2 Breaking in a New Machine

Your machine has been well adjusted and tested before delivery, but the initial operation on the
machine in severe conditions will seriously affect the performance or reduce the service life of the
machine. Thus Sany recommends you to perform 100-hour test run before putting the machine in-
to production use.
During the test run:
Safety, Operation and Maintenance Manual-March 2021 1-5