Safety; System Functions; Operation; Maintenance - SANY STG170C-8 Safety, Operation & Maintenance Manual/Parts List

Introduction
STG Series Motor Grader
1.2.3.1 Introduction
This section provides an overview of what is
covered in the rest of this manual, including
machine label information and Sany contact
information.

1.2.3.2 Safety

This section covers basic safety information
relating to this machine. Make sure you fully
understand all the precautions described
in this manual and the safety labels on the
machine before operating or maintaining this
machine. Failure to do so may result in serious
injury or death.

1.2.3.3 System functions

This section provides an overview of all the
controls and prompt & operating systems on
your machine. Only when you are familiar with
all systems, can you operate and maintain the
machine safely.

1.2.3.4 Operation

This section provides the basic operating
procedures for the job. It is important to study
and become familiar with all procedures before
performing any operations with the machine.

1.2.3.5 Maintenance

This section provides all general maintenance
and repair procedures. It is important to study
and become familiar with all the maintenance
and repair procedures before performing
any maintenance or repair operations on the
machine.

1.2.3.6 Troubleshooting

This section outlines common malfunctions
and fault diagnostic procedures for the
operating system. Basic mechanical, hydraulic
and electrical system troubleshooting is
included.
Safety, Operation & Maintenance - January 2020
1-3