Subscribe to Our Youtube Channel
Related Manuals for SANY SCM2000C-8S
Summary of Contents for SANY SCM2000C-8S
- Page 1 Quality Changes the World Milling Machine SCM2000C-8S Safety, Operation & Maintenance Manual...
- Page 2 Find manuals at https://best-manuals.com...
- Page 3 SCM2000C-8S Milling Machine SCM2000C-8S Milling Machine Safety, Operation & Maintenance Manual WARNING Read and follow the safety precautions and instructions in this manual and on the machine decals. Failure to do so can cause serious injury, death or property damage. Keep this manual with the machine for reading and future reference.
- Page 4 Scan here to download the Service Cloud APP Android © 2020 by Sany Group. All rights reserved. No part of this publication may be reproduced, used, distributed or disclosed except during normal operation of the machine as described herein. All information included within this publication was accurate at the time of publication.
- Page 5 Operate and maintain parts (such as engine) on the milling machine, and observe related regula- tions on Users' guide supplied from their manufacturer. Sany expressly bears no liability for any machine failure or damage due to force majeure of natural disasters (earthquake, typhoon) and wars.
- Page 6 • Ensure the operators are trained and fully understand the Operation and Maintenance Manual supplied by Sany. Ensure they are in physical fitness and have the certification of operation. Oth- erwise, it is forbidden to operate the milling machine. •...
- Page 7 Table of Contents SCM2000C-8S Milling Machine Table of Contents 1 Introduction........................1-1 1.1 Overview..........................1-3 1.2 Your Documentation Package.....................1-4 1.2.1 Introduction........................1-4 1.2.2 Recommendations on the Use of Data ..............1-4 1.2.3 Storage of Data ......................1-4 1.2.4 Structure of this User’s Guide ..................1-4 1.3 Your Sany Equipment......................1-6 1.3.1 Breaking in a New Equipment ..................1-6...
- Page 8 Table of Contents SCM2000C-8S Milling Machine 2.4.4 Safe Traveling ......................2-32 2.4.5 Safe Parking....................... 2-36 2.5 Precautions for Using the Milling Drum................2-37 2.5.1 Falling Speed of the Milling Drum ................2-37 2.5.2 Unintended Use ......................2-37 2.6 Maintenance Precautions ....................2-38 2.6.1 Basic Rules.........................
- Page 9 Table of Contents SCM2000C-8S Milling Machine 3.2.4 Middle Control Console .................... 3-14 3.2.5 Left front Ground Control Box.................. 3-19 3.2.6 Right front Ground Control Box ................3-20 3.2.7 Left rear Ground Control Box................... 3-21 3.2.8 Right rear Ground Control Box ................3-22 3.3 Levelling Controller ......................
- Page 10 Table of Contents SCM2000C-8S Milling Machine 4.6.1 Precautions for Moving the Machine ..............4-20 4.6.2 Move Forwards ......................4-21 4.6.3 Move Backwards ...................... 4-21 4.6.4 Steering........................4-22 4.6.5 Antislipping Function....................4-24 4.7 Machine Operation......................4-25 4.7.1 One-key Start ......................4-25 4.7.2 Sprinkler ON/OFF......................
- Page 11 Table of Contents SCM2000C-8S Milling Machine 5.3.1 Introduction......................... 5-13 5.3.2 Routine Maintenance....................5-13 5.3.3 Clean ........................... 5-14 5.3.4 Check .......................... 5-16 5.4 Initial 50h Maintenance ..................... 5-39 5.4.1 Introduction......................... 5-39 5.4.2 Milling Drum Gearbox ....................5-40 5.4.3 Fixation Points ......................5-41 5.4.4 Milling Drum Bearing....................
- Page 12 Table of Contents SCM2000C-8S Milling Machine 6.2.8 Accumulator ....................... 6-27 6.2.9 Cooler.......................... 6-27 6.2.10 Other Faults ......................6-27 6.3 Electrical System........................ 6-33 6.3.1 Engine and Battery....................6-33 6.3.2 Advance Drive System ..................... 6-33 6.3.3 Steering System ......................6-34 6.3.4 Working Mechanism Control System ..............6-34 6.3.5 Lights, Alarms and Auxiliary System ..............
-
Page 13: Table Of Contents
SCM2000C-8S Milling Machine Introduction Introduction 1 Introduction........................1-1 1.1 Overview..........................1-3 1.2 Your Documentation Package.....................1-4 1.2.1 Introduction ........................1-4 1.2.2 Recommendations on the Use of Data ..............1-4 1.2.3 Storage of Data ......................1-4 1.2.4 Structure of this User’s Guide ..................1-4 1.3 Your Sany Equipment......................1-6 1.3.1 Breaking in a New Equipment ...................1-6... - Page 14 Introduction SCM2000C-8S Milling Machine WARNING Read and understand all safety precautions and instructions in this manual before reading any other manuals provided with this machine and before operation or maintaining it.Failure to do this could result in death or serious injury.
-
Page 15: Introduction
• Sany is a leading manufacturer of heavy construction equipment worldwide. This operator's manual provides safety, oper- ation, maintenance, troubleshooting and tech- nical specifications. In order to properly use your equipment, it is important to read this... -
Page 16: Your Documentation Package
Put all data in a folder (if including leaflets) and print and replace the lost, damaged and blotted documents. • Add the latest Sany data in time and de- stroy the inapplicable old documents. 1.2.3 Storage of Data • Put this User’s Guide and the Load Table in the equipment operation room;... - Page 17 If you have any question on your equipment, contact your Sany distributor before operating or maintaining the equipment. 1. Introduction This section provides an overview of what is...
-
Page 18: Your Sany Equipment
Thus Sany recom- mends you to perform 100-hour test run be- fore putting the equipment into production use. -
Page 19: Equipment Information
SCM2000C-8S Milling Machine Introduction 1.3.2 Equipment Information The factory numbers (serial numbers) and models on the data plate are important num- bers required for ordering replacement parts or requiring assistance for your equipment. So please write down the related information in this manual for further use (see: “Serial... -
Page 20: Equipment Directions
Introduction SCM2000C-8S Milling Machine 1.3.3 Equipment Directions Fig.1-3 1. Front 2. Back 3. Left 4. Right Safety, Operation and Maintenance Manual-April 2020... -
Page 21: Serial Number And Distributor Information
SCM2000C-8S Milling Machine Introduction 1.3.4 Serial Number and Distributor Information This location is for you to record information relating to your equipment. It is suggested that you keep this manual with your equipment at all times for reference. Model No. -
Page 22: Contact Information
Introduction SCM2000C-8S Milling Machine 1.4 Contact Information Thank you for purchasing a Sany product. In the event that you should need to contact us for any reason, you can reach us as follows: Address: SANY Industry Town, Economic and Technological Development Zone, Changsha,... - Page 23 SCM2000C-8S Milling Machine Safety Safety 2 Safety.............................2-1 2.1 General ...........................2-5 2.1.1 Introduction ........................2-5 2.1.2 Applicable Range of the Machine ................2-7 2.1.3 Qualification Required for Working with the Machine..........2-8 2.1.4 Conversions and Alterations to the Machine ............2-8 2.2 Safety Message........................2-9 2.2.1 Introduction ........................2-9 2.2.2 Safety Message Introduction..................2-9...
- Page 24 Safety SCM2000C-8S Milling Machine 2.6.1 Basic Rules ....................... 2-38 2.6.2 Lockout/Tagout Procedures..................2-38 2.6.3 Maintenance Area....................2-38 2.6.4 Washing the Machine ....................2-39 2.6.5 Self-preparation......................2-39 2.6.6 Using the Tool Properly ................... 2-39 2.6.7 Maintenance with Engine Running................ 2-40 2.6.8 Maintaining under the Machine................2-41 2.6.9 Maintaining in Noisy Environment .................
- Page 25 Safety SCM2000C-8S Milling Machine Safety, Operation and Maintenance Manual-April 2020...
- Page 26 Safety SCM2000C-8S Milling Machine WARNING Read and understand all safety precautions and instructions in this manual before reading any other manuals provided with this machine and before operation or maintaining it.Failure to do this could result in death or serious injury.
- Page 27 Sany reserves the right to change these information at any time without prior notice. Consult Sany dealer to...
- Page 28 The manual should be kept in the cab all the time for operator to refer to at any time. Con- tact Sany dealer to obtain a new manual if the original one is missing or cannot be read. This manual should be regarded as a perma- nent component of your equipment.
- Page 29 • Information or illustrations in this man- ual must not be duplicated, reproduced or distributed, or employed for competi- tive purposes. Sany explicitly reserves all rights of possession thereof. Fig.2-2 2.1.2 Applicable Range of the Machine 1. Intended use...
- Page 30 • Please consult technical engineers from Sany for any operation on cement concrete layer whose thickness is above 3cm. 3. Unintended use If the machine is used for other purposes or...
- Page 31 This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...
Need help?
Do you have a question about the SCM2000C-8S and is the answer not in the manual?
Questions and answers
I want to know full service details
The SANY SCM2000C-8S milling machine offers high-quality performance and excellent after-sales service support. The operator's manual provides details on safety, operation, maintenance, troubleshooting, and technical specifications. Users are advised to read the manual carefully before operating the machine to understand its structure, performance, and potential hazards. However, specific details on service procedures, maintenance schedules, or warranty terms are not provided in the available information.
This answer is automatically generated