Recommendations On The Use Of Data; Storage Of Data; Structure Of This Manual - SANY STG190C-8S Safety, Operation And Maintenance Manual

Introduction
•
Safety, Operation and Maintenace Manual;
•
Parts Book: including the Parts List and the drawings needed when ordering parts. If the Parts
Book is not attached with the machine contact Sany.

1.2.2 Recommendations on the Use of Data

•
The documents only apply to the equipm- ent herein.
•
Ensure the documents are complete and are the latest editions.
•
Put all data in a folder (if including leaflets), and print and replace the lost, damaged and blotted
documents.
•
Add the latest Sany data in time and destroy the inapplicable old documents.

1.2.3 Storage of Data

•
Put this User's Guide and the Load Table in the machine operation room;
•
You'd better put the Spare Parts Drawing Volume in the maintenance area or office to enable
the maintenance personnel to find it at any time.

1.2.4 Structure of this Manual

This Manual covers use and maintenance of your machine. Get familiar with it before performing
any operations. Put this manual within easy reach for your reference. Replace it if it is lost or dam-
aged. Due to improvement and updating of products, some information may differ from your ma-
chine. If you have any question on your machine, contact your Sany distributor before operating or
maintaining the machine
1. Introduction
This section provides an overview of what is covered in the rest of this manual, including machine
label information and Sany contact information.
2. Safety
This section covers basic safety information relating to this machine. Make sure you fully under-
stand all the precautions described in this manual and the safety labels on the machine before op-
erating or maintaining this machine. Failure to do so may result in serious injury or death.
3. System functions
This section provides an overview of all the controls and prompt & operating systems on your ma-
chine. Only when you are familiar with all systems, can you operate and maintain the machine
safely.
4. Operation
This section provides the basic operating procedures for the job. It is important to study and be-
come familiar with all procedures before performing any operations with the machine.
1-4 Safety, Operation and Maintenance Manual-March 2021
STG190C-8S Motor Grader