STG Series Motor Grader
Avoid operating or running the machine at
•
a high speed in overload working conditions.
Avoid sudden starting, rapid movement or
•
abrupt stop of the machine.
Cool down the machine system at the end
•
of every working day.
1.3.3 Machine Information
The factory numbers (serial numbers) and
models on the nameplate are important
information required for ordering replacement
parts or requiring assistance for your machine.
So please write down the related information
in this manual for further use (see: section
1.3.4 "Serial number and distributor
information" on Page 1-6 ).
The nameplate is riveted on the left side of the
front frame,see Fig.1-3.
Fig.1-3
Safety, Operation & Maintenance - January 2020
Introduction
1-5