Ulvac GLD-040 Instruction Manual page 6

Direct-drive oil sealed rotary vacuum pump
Hide thumbs Also See for GLD-040:
Table of Contents

Advertisement

Caution
Never touch the rotating section of the motor, shaft or coupling while the
pump is in operation. Failure to do so will result in injury.
Caution
Never place combustible materials around the motor or pump. There is a risk
of fire.
Also, do not place objects which block ventilation around the motor. Abnormal
heat generation may result in burns or fire.
Caution
Do not touch the motor while the pump is in operation or when the pump is
still hot immediately after it stops. Touching it will result in burns.
Caution
Arrange wires correctly in accordance with the "Electrical Equipment
Technical Standard" and "Wiring Regulations." Incorrect wiring may result
in fire.
Caution
If the pump ceases operation or malfunctions, turn off the power switch
immediately to prevent accidents, and ask the company from which you purchased
the pump or the manufacturer for inspection and repair.
Note
Do not operate the pump without adding pump oil. If it is operated in an
oil-less condition, the pump will be damaged.
- 04 -

Advertisement

Table of Contents
loading

Table of Contents