Table of Contents
Advertisement
4 – Operation
Operating the Pain Manager Infusion Pump
Before performing any of the set-up and period tests or to operate, program or configure
the pump, you will need to access the pump using the security codes. As the BodyGuard
595 Color Vision™ is designed for pain management therapies the pump has several
levels of security to ensure safe set up and administration of pain protocols and to prevent
idle or malicious tampering.
Access Codes and Keypad Lock
To operate, program and configure the BodyGuard 595 Color Vision™ Infusion pump
three Access Codes are required.
All codes and codes levels can be modified and controlled from technician menu.
Level One
Level Two
Level Three
* / **
refer to senior clinical or lead service personnel.
Additionally, a technician's code is necessary to access the technician menu but this is
only provided to fully trained and authorized electrical biomedical engineering
departments.
Keypad Lock
BodyGuard 595 Color Vision™ Directions For Use
Allows user to run pre-set protocols and titrate
700
infusion rate (within pre-set protocol limits).
Allows authorized users to deliver Clinician Activated
*
Bolus or loading dose.
Allows users to set up or modify standard infusion
**
protocols & change pump configuration parameters in
'Change Set Up'.
4 – Operation
21
Advertisement
Table of Contents
Troubleshooting
