Installation And Set Up; Unpacking; Charging The Pump - CME Color Vision BodyGuard 595 Directions For Use Manual

3 – Installation and Set Up

Unpacking

1. Carefully remove the pump and charger from the box.
2. Make sure no items were damaged during shipment.
3. Make sure you have the following items:
 BodyGuard 595 Color Vision™ Infusion Pump
 Charging Cradle with Power Cord or Battery Charging Cable (cable length: 2.5
meters)
 Rechargeable Battery Pack Li Polymer
 Directions for Use (DFU)
 Applicable Quick Reference Guide(s)
 PCA Bolus cable (optional) (Cable length: 2.0 meters)
 Tabletop charger (optional)
 External wall charger (optional) (cable length:
2.0 meters)
NOTE: If any items are missing or damaged, contact your BodyGuard 595

Color Vision™ supplier.
NOTE: In certain locales, Power Cord may come as a separate item.


Charging the Pump

NOTE: the pump is protected against overcharging. In order to keep your battery

fully charged, connect the pump to the mains via the Charger whenever possible.
Be sure that the battery is fully charged at all times.
Warning: if the battery is removed during operation while pump is not connected
to a charger connected to mains, the pump will turn off.
BodyGuard 595 Color Vision™ Directions For Use
3 – Installation and Set Up
19