Installing Batteries - Pixii PowerShaper 2.0 Installation Manual

4.10 Installing batteries

NOTE:
Mount back bottom cover plate before installing the batteries. See chapter
on page 21.
Cabinets are default prepared for 3U batteries (up to 10pcs) from factory, with 148mm spacing between
battery supports. It is possible to use 4U batteries (up to 8pcs) as well, but the battery support brackets
spacing must be adjusted to 187mm. Bottom battery position is the same for both options.
148mm
Figure 4.31 3U battery option
NOTE:
Flip battery mounting brackets (ears) when using 4U batteries. See picture
Installation Guide ● PowerShaper 2.0
Figure 4.33 Flipped mounting brackets on 4U battery
"3.2 Bottom cover plate"
187mm
Figure 4.32 4U battery option
Figure 4.33.
Electrical installation
35