Table of Contents
Advertisement
2.3.2 Industrial grade energy meter
The Pixii system has support for an energy meters from different manufacturers. Depending on type of
the meter, external measuring transformers may be required. Currently, communication via Modbus/
RTU (RS485) is supported. This means that a cable (2-wire at least) needs to be connected from the
meter to the controller in the system. Maximum practical distance is 300 meters.
Supported AC Meters
•
Phoenix Contact:
EEM-EM357
»
EEM-EM355
»
EEM-MA370-R
»
EEM-MA371-R
»
•
Schneider:
iEM 31xx series
»
iEM 32xx series
»
iEM 33xx series
»
Acuvim II series | Accuenergy (Modbus/TCP available)
•
Installation Guide ● PowerShaper 2.0
Preparing installation site
19
Advertisement
Table of Contents
