4 Electrical installation
For safety reason, before you start installation, ensure all external power sources are disconnected, as
well as internal battery and load fuses/breakers. To avoid injuries caused by high leakage/touch current
you must always start installation by connecting earthing wire (PE), before you connect other AC input
wires (phases, neutral).
4.1 Preparation
Remove plastic cover (highlighted in yellow) by releasing 5x M5x10 torx screws.
NOTE:
Keep fixings and cover at safe place, as you need them later!
Installation Guide ● PowerShaper 2.0
24
Figure 4.1 Removing the plastic cover
Electrical installation