Customer Alarm Connection - Pixii PowerShaper 2.0 Installation Manual

4.7 Customer alarm connection

Pixii controller is equipped with 2 configurable relays for customer alarm functions. All relays contacts
are accessible on connector terminals -X4:6 - -X4:16.
All relays are configurable through the software. It could be added different alarm/warning to each of
them. For more informations, see document DN 14070 (14070_Pixii PowerShaper Notifications).
For multicabinet solution, alarm relays could be connected together in series, to signalize as a one alarm
for the group of cabinet, or it could be connected separately to signalize alarm for each cabinet in the
group.
Installation Guide ● PowerShaper 2.0
Figure 4.23 Customer alarm connector terminals
NO
C
NC
NO
C
NC
Electrical installation
31