Table of Contents
Advertisement
6EDL_SPI_LINK configuration dongle for 6EDL71x1 series
User guide
Instructions
Figure 30
Parameter read from a target device
17. The user can read the individual parameter blocks using the read button of the parameter block as shown
in
Figure
31.
Figure 31
Parameter read from target device
The following message displays after a successful reading of the parameter block.
Figure 32
Parameter block read from target device message
Observe the status information from the target device by reverting to the Status option in the Parameter
Controls window. Details of the target device status are available, for example, if the device has shut down the
type of fault that caused the shutdown is indicated. The status is read periodically when the polling switch is in
the right position and the white dot is displayed.
User guide
18
V 1.0
2023-11-02
Advertisement
Table of Contents
