Infineon 6EDL SPI LINK User Manual page 17

6EDL_SPI_LINK configuration dongle for 6EDL71x1 series
User guide
Instructions
The following message is displayed when the data is transferred to the target device.
Figure 27 Write message
14. The updated parameters can also be stored in a project file on the PC; click Project > Save As and choose an
appropriate project name. This file is saved with a .6EDL extension.
Figure 28 Saving project file
15. The parameters stored in the 6EDL71x1 can also be read back to the PC using the Read Device" as shown in
Figure 29.
Figure 29 Read device
16. The parameters displayed on the Parameter Controls are updated with the parameters stored in the target
device. Any parameter blocks that have changed are indicated with a purple dot as shown in Figure30.
User guide 17 V 1.0
2023-11-02