Table of Contents
Advertisement
6EDL_SPI_LINK configuration dongle for 6EDL71x1 series
User guide
Instructions
After the connection is successful, the Workbench software is ready to read and write configuration
settings to the target 6EDL71x1 device.
Attention:
During the following operations, ensure that the target board is powered at all times.
11. Access the device settings in the Parameter Controls window as shown in
Smart Gate Driver option (only 6EDL7141 is supported on earlier versions of the software).
Figure 22
Parameter Controls window
12. Each parameter contains a drop-down that opens a list of specific parameters to select.
Figure 23
Parameter modifications
User guide
15
Figure
22. Click the 6EDL71x1
V 1.0
2023-11-02
Advertisement
Table of Contents
