Crowcon Clip O2 User Manual page 9

Clip SGD
The table below shows the 'alarms' and 'alerts' that may be shown on the display during
operation.
Alarm Alarm Standard
Low Alarm Exceeds 1st
Alarm set point
High Alarm Exceeds 2nd
Alarm set point
Remaining life Below 30 days
Lifetime Past 24 months
expiration
Test failure Failure of
sensor test /
calibration
Battery test Low power
Bump test Bump test
period
Calibration Calibration
period
⚠
CAUTION
Default alarm set points are based on common international standards. It is user
responsibility to ensure the configured alarm set points are in accordance with local
regulations and site procedures.
Shown on LCD
Display
1
icon &
concentration
icon &
2
concentration
icon
Display icon with
X
beeping
V X
Alarm and Vibration Display
Buzzer, LED
Vibration
Vibration
Service life is over
(Replace with a new Clip SGD)
Press the push button to turn off
the alarm
Press the push button to turn off
the alarm
Buzzer, LED
9