Return To Gas Measurement Mode - Crowcon Clip O2 User Manual

5.3 Return to Gas Measurement Mode

To return to Gas Measurement Mode from Calibration Mode, press the button to cycle
through the Fresh Air Calibration
on the display.
Whilst 'ESC' is shown on the display press and hold the button for 3 seconds, the device
will return to the Gas Measurement screen.
%
Calibration concentration.
Gas
Concentration
14
and Standard Calibration
O
2
18%Vol
screens until 'ESC' is shown
CO
100ppm
Clip SGD
% VOL
H S
2
25ppm