Self Test And Bump Test; Self Test; Bump Test - Crowcon Clip O2 User Manual

7. Self Test and Bump Test

7.1 Self Test

The Clip SGD provides a Self Test function.
The default interval of the Self Test reminder is 20hrs.
Use the IR Link or Docking Station to configure the interval between 1hr and 20hrs, or set to
"off".
When the configured Self Test is due, "STS" will flash on the screen (the message will
continue to flash until the user performs a successful Self Test).
• Press the button to initiate the Self Test function.
The device will perform a self test by operating the buzzer, LED's, vibrator and LCD. It will also
show the configured low and high alarm set points on the display.
After the test is completed, "END" will be displayed on the screen. (The user is required to
check that the items operated in the self test, performed as expected).

7.2 Bump Test

The device can be configured to provide an on screen Bump Test reminder.
The default setting for the Bump Test reminder is "off", no Bump Test reminder will be
displayed.
If a Bump Test reminder interval is required it can be configured using the IR Link or Docking
Station. The interval can be configured from 1 day to 365 days.
When configured and a Bump Test is due, the "bts" message be displayed and will flash on
the screen.
16
1
PPM
ALARM
M
D
T
2
PPM
Clip SGD
1
V X
2
MAX
M N I
% LEL
PPM
% VOL