Storing A Redial Number In Memory Dial; The Page Feature; Tone Definitions - VTech 900i User Manual

CORDLESS PHONE OPERATION
Storing a Redial Number in Memory
Dial
To store the last number you dialed as
a regular Speed Dial number, press
PRG, a number key (0..9), REDIAL,
MEM.

The Page Feature

From the base unit, press PAGE to
signal the person at the handset. To
end the page at the base, press PAGE
again. To end the page at the handset,
press OFF.
This feature is also useful if you have
misplaced the handset. To locate the
handset press PAGE at the base. This
starts a paging tone at the handset.
When it is located, cancel the paging
tone by pressing OFF on the handset.

Tone Definitions

A long warbling tone signals an
i n c o m i n g c a l l .
programmable. See Programming
The Ringer Type.
A long series of beeps signals a page.
A short buzz when you press PHONE
signals the batteries need charging.
A short beep signals that you are either
out of range, or that a call is on HOLD.
A long buzzing tone signifies an invalid
key operation.
17
T h i s t o n e i s