VTech 900i User Manual page 34

REMOTE OPERATION OF ITAD
8 SELECT ANNOUNCEMENT
• Press 8 to toggle between available
announcements.
• A f t e r e a c h p r e s s , y o u h e a r
"Announcement 1",
"Announcement 2", or
"Outgoing message".
• The first time the key is pressed, the
voice prompt will indicate the current
selection.
9 RECORD ANNOUNCEMENT
• P r e s s 9 t o r e c o r d a n e w
announcement.
• Y o u w i l l h e a r
announcement X after tone, press
4 to end recording", where X is
either 1 or 2, depending on the current
announcement selection.
• If your current selection is Outgoing
Message, you will hear "Cannot
record outgoing message".
• Press 4 to complete announcement
recording.
0 RECORD MEMO
• Press 0 to record a new memo to the
• You will hear either "Record memo
• If you have set the ITAD for zero
" R e c o r d
• Press 4 to STOP recording
• You can press 3 (skip) to bypass the
# OFF
• Press # to switch the ITAD off.
• You will hear "Answering machine
• Now the ITAD will only be reactivated
34
currently selected mailbox. If the
current mailbox selection is All
Mailboxes, then the message is
recorded into the Generic mailbox.
for mailbox X after tone, press 4 to
end recording", where X is 1-4, or
"Record memo for generic mailbox
a f t e r t o n e , p r e s s 4 t o e n d
recording".
mailboxes, you will hear "Record
memo after tone, press 4 to end
recording".
voice prompt, and youíll hear the beep
to start recording.
off".
to answer an incoming call if the caller
lets it ring 10 times.