Storing Pauses In Memory; Using Redial; Storing A Redial Number Into Speed Dial; The Page Feature - VTech TeleZapper VT2558 Operating Instructions Manual

Operating Instructions

Storing Pauses in Memory

• To insert a pause in a phone number,
press PAUSE. The
approximately 4 seconds in length. For
longer pauses, press PAUSE two or
more times. Each additional press adds
an additional 4 second pause.
• If your phone is connected to a PBX you
can store the PBX access number and
a pause before the phone number. For
example, to store 9-PAUSE-555-1234 in
memory location 8 do the following:
• Press PROG/MEM.
• Press 8.
• Press 9.
• Press REDIAL/PAUSE.
• Dial 555-1234.
• Press PROG/MEM.

Using Redial

• To redial the last number you called,
press PHONE/FLASH then press
REDIAL/PAUSE. The phone will
automatically dial the number.

Storing a Redial Number into Speed Dial

• To store the last number you dialed as
a Speed Dial number, press PROG/
MEM, a location number (0-9), REDIAL/
PAUSE, PROG/MEM.

The Page Feature

• From the Base Unit, press PAGE to
signal the person at the idle Handset.
• To end the page at the Base, press
PAGE again.
• To end the page at the Handset, press
OFF, or place the Handset back in the
Base.
• This feature is useful in locating a
misplaced Handset.
• The page alert will continue for
approximately 60 seconds.
pause is
12