Quick Reference Guide; Initial Power-Up; Vtech 900I Cordless Telephone - VTech 900i User Manual

QUICK REFERENCE GUIDE

Here's a brief guide to the features and
functions of your VTech 900i cordless
telephone and Integrated Telephone
Answering Device (ITAD):

INITIAL POWER-UP

• Connect telephone line cord to base
unit and telephone jack.
• Plug AC adapter into a standard
electrical outlet. The ON/OFF LED
will flash during initialization and the
LCD clock display will flash on
completion (approx. 20 seconds).
• Set Dial Mode switch to PULSE or
TONE.
• The CHARGE LED will flash until
handset is placed in base and the
batteries are charged (charge
batteries 24 hours before first use).

VTech 900i Cordless Telephone

MAKING CALLS
• Press PHONE key on the handset.
When the PHONE indicator lights and
you hear a dial tone, dial the number.
ANSWERING CALLS
• If the handset is in the base unit
cradle, just pick up the handset.
• If the handset is away from the base
unit, press any key other than OFF on
the handset.
HANGING UP
• Press the OFF key on the handset, or
place the handset in the base cradle.
MEMORY DIALING
Numbers can be stored in memory
using the handset unit.
To store a number in memory:
• Press PRG.
• Enter the memory location (0..9).
• Enter the phone number you wish to
store (up to 16 digits).
• Press MEM. The phone number is
now stored.
To dial a number from memory using
the handset unit:
• Press PHONE.
• Press MEM and the number key you
assigned (0..9).
USING REDIAL
• Press PHONE, then REDIAL to
automatically redial the last number
you dialed.
HOLD
• When using the handset press HOLD
to put a call on hold.
• To return to the call, press PHONE.
CHANGING CHANNELS
• If you experience noise or interference
during a conversation, press CHAN
to switch to a clear channel.
FLASH
• You can use your VTech 900i cordless
telephone with services such as Call
Waiting and Call Forwarding. Instead
of pressing the switch-hook, press
FLASH on the handset.
PAGE
• From the base unit, press PAGE to
signal the person at the handset.
MUTE
• When using the handset, press MUTE
to temporarily turn off the microphone.
To return to two-way operation, press
MUTE again.
11