Review/Recall Telephone Number From Speed Dial Memory - VTech PDL GX Manual

V
TECH
TITLE PDL GX Internal Product Specification
MODEL PDL GX
6. The user can abort programming at any time by pressing the
OFF key. In this case and ERROR TONE will be generated
and the following will be displayed:

3.9.2 Review/Recall Telephone Number from Speed Dial Memory

To access the Speed Dial memory, select "SPEED DIAL MEMORY" from the menu. There are 20 speed
dial memory locations for recall or review. Upon entering the "SPEED DIAL MEMORY" menu item, the
user will be prompted with the following display:
The user can directly access any speed dialing location by entering a two digit location number or scroll
sequentially through the memory locations using the
The following is an example display of a speed dial location:
Speed Dial
Location Number
The location number is displayed on the top left followed by the stored telephone number.
A total of 20 digits can be stored in any given location.
When the telephone is on-hook, the user can recall and append the speed dial number to any digits
already on the display by pressing the SELECT key. The user can also press the PHONE key to recall
and immediately dial the speed dial number as displayed.
If the telephone is already off-hook, the user can immediately recall the selected speed dial number by
pressing the SELECT or PHONE key. The display will show the speed dial number recalled for dialing
appended to any other digits previously dialed on this call.
In on-hook mode only, the user may recall the phone number for further editing (i.e., pre-dial) by pressing
the SELECT key.
To exit from reviewing the Speed Dial review session, press the OFF key. The user is then returned to the
"SPEED DIAL MEMORY" menu item.
Reference: PRC 00DM
This document is proprietary to V
Specifications are preliminary and are subject to change without notice.
E
NGINEERING
TQFFE!EJBM TQFFE!EJBM
TQFFE!EJBM TQFFE!EJBM
MPDBUJPO!`` MPDBUJPO!`` MPDBUJPO!`` MPDBUJPO!``
T14!6662323 T14!6662323 T14!6662323 T14!6662323
Revision: 3.0
E C L
TECH NGINEERING ANADA
C L
ANADA
QSPHSBNNJOH QSPHSBNNJOH
QSPHSBNNJOH QSPHSBNNJOH
JODPNQMFUF JODPNQMFUF JODPNQMFUF JODPNQMFUF
or keys.
.
TD
IMITED
Saved Phone
Number
Page: 33 of 56
26649