VTech 900i User Manual page 9

GETTING STARTED
6. C H A R G E T H E H A N D S E T
BATTERIES BEFORE USE.
T h e b a t t e r i e s
automatically whenever the handset
is in the base unit cradle. The
batteries must be charged for 24
hours before using your phone for
the first time. The CHARGE LED
will flash until the handset is placed
in the base cradle and the batteries
are charged.
7. CHECK FOR A DIAL TONE.
After the batteries are charged, pick
up the handset and press the
PHONE key. The PHONE indicator
should light up, and you should
hear a dial tone. If not, see IN
CASE OF DIFFICULTY.
CAUTION:
1. Never install telephone wiring during
r e c h a r g e
2. Never install telephone jacks in wet
3. Never touch uninsulated telephone
4. Use caution when installing or
9
a lightning storm.
locations unless the jack is
specifically designed for wet
locations.
wires or terminals unless the
t e l e p h o n e l i n e h a s b e e n
disconnected at the network
interface.
modifying telephone lines.