Listening To Messages; Changing The Announcement; Recording A Memo - VTech 900i User Manual

REMOTE OPERATION OF ITAD
The more you use the ITAD in remote
operation, the more familiar you will
become with the various functions on
the numbered keypad. Soon you may
be able to access all functions with little
or no help from the voice prompts!

Listening to Messages

1. Press 6 to enter mailbox selection.
2. Press 1-4 for the corresponding
mailbox or 0 for Generic mailbox.
You could also press 5 for All
mailboxes or skip steps 1 & 2 (as All
mailboxes is the default).
3. Press 1 to play messages from the
chosen mailbox.
4. Use the keys 2 (repeat) & 3 (skip) to
scan forwards and backwards
through messages.
5. Press 5 at any time during or
immediately following a message
to delete.

Changing the Announcement

1. Press 7 to check the current
announcement.
2. P r e s s 8 u n t i l t h e d e s i r e d
Announcement is reached (1, 2 or
OGM).
3. If Announcement 1 or 2 is chosen,
press 9 to record. If OGM is chosen
skip steps 3-5.
4. Record Announcement after the
beep.
5. Press 4 to stop recording.

Recording a Memo

1. Press 6 for mailbox selection.
2. Choose mailbox 1-4, 0 for Generic
mailbox, or 5 for All mailboxes. You
can also skip steps 1 & 2 if you
choose All mailboxes - the memo
will be stored in the Generic mailbox
(this is the default).
3. Press 0 to record a memo to the
currently selected mailbox.
4. Record memo after the tone.
5. Press 4 to stop recording.
31