Vanco EVOLUTION EVWP3000 Quick Start Manual
  1. Manuals
  2. Brands
  3. Vanco Manuals
  4. Extender
  5. EVOLUTION EVWP3000
  6. Quick start manual

Vanco EVOLUTION EVWP3000 Quick Start Manual

Hdbaset extender set with wall-plate transmitter
Hide thumbs
1
2

Advertisement

Table of Contents

EVWP3000 Quick Start Guide
HDBaseT Extender Set
with Wall-Plate Transmitter

Connection Diagram

1.
Connect a source such as a Blu-Ray player, game console, A/V receiver, cable or satellite
receiver, etc. to the HDMI input on the transmitting unit.
2.
Connect a display such as an HDTV or HD projector to the HDMI output on the receiving unit.
3.
Connect a single Cat5e/6 cable to the "HDBaseT OUT" connector of the transmitting unit, and
then to the "HDBaseT INPUT" connector of the receiving unit.
4.
For power, plug in the transmitting or receiving unit with included DC 24V 1A power supply.
5.
Power on each device in the same sequence - transmitter and receiver will already be powered
when either unit is plugged in.
Source
At this point the display connected should display the source signal connected to the extender set.
If no signal is being displayed, check cables and connections.
HDMI Cable
Transmitter TX
Power Supply TX or RX
BY
CAT5e/6
HDMI Cable
HDBaseT 230ft/70m Receiver with PoE
Receiver RX
Receiver
HDMI Cable
Television

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EVOLUTION EVWP3000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vanco EVOLUTION EVWP3000

Summary of Contents for Vanco EVOLUTION EVWP3000

  • Page 1 EVWP3000 Quick Start Guide HDBaseT Extender Set with Wall-Plate Transmitter Connection Diagram Connect a source such as a Blu-Ray player, game console, A/V receiver, cable or satellite receiver, etc. to the HDMI input on the transmitting unit. Connect a display such as an HDTV or HD projector to the HDMI output on the receiving unit. Connect a single Cat5e/6 cable to the “HDBaseT OUT”...
  • Page 2 Please read the product manual prior to calling or installing this unit since it will familiarize you with the capabilities of this product and its proper installation. In case of problems, please contact Vanco Technical Support by dialing 1-800-626-6445. You can also email technical support issues to techsupport@vanco1.com. When calling, please have the part number, serial number (affixed to the bottom of the unit), and invoice available for reference during the call.

Table of Contents