Related Manuals for Vanco EVOLUTION EVEXUSB2
Summary of Contents for Vanco EVOLUTION EVEXUSB2
- Page 1 USB 2.0 EXTENDER OVER CAT5E/6 CABLE EVEXUSB2 Perfect solution for security monitoring, gaming, industrial control, professional audio-visual, smart medical, and more.
-
Page 2: Safety Instructions
INTRODUCTION The Evolution by Vanco EVEXUSB2 is a full function USB 2.0 extender over a single Cat5e/6 cable, information and control can be transmitted up to 330ft/100m over Cat5e and 492ft/150m over Cat6. Supports up to four USB 2.0 devices such as webcams, microphones, touchscreens, printers, cameras, scanners, USB flash drives, keyboards, mice, etc., and supports gigabit switch cascade capabilities. -
Page 3: Specifications
SPECIFICATIONS Product Parameters Compatibility USB 2.0, backwards compatible with USB 1.1/1.0 Transmission Rate Up to 480 Mbps Cat5e up to 100m / 330ft Transmission Distance Cat6 up to 150m / 492ft Webcams, microphones, video bars, mouse, keyboard, USB Devices touchscreens, and other USB 2.0 peripherals Switch Extension Supports Gigabit Switches USB Hot-Plug... -
Page 4: Panel Descriptions
PANEL DESCRIPTIONS Transmitter Panel 1. USB A Port: Connect to a host device such as a computer or security NVR 2. CAT6 OUT: Connect a single Cat5e/6/6a cable from the transmitting unit to the receiving unit (home-run cabling strongly recommended without any couplings, punch-downs, or patch panels) Receiver Panel 1. RESET Button: Press to reset the USB connection 2. CAT6 IN: Connect a single Cat5e/6/6a cable from the transmitting unit to the receiving unit (home-run cabling strongly recommended without any couplings, punch-downs, or patch panels) 3. -
Page 5: Operation
OPERATION Connect & Operate 1. Connect the transmitting unit to the USB host device such as a computer or security NVR. 2. Connect up to four USB devices such as a mouse, keyboard, webcam, microphone, touchscreen, USB flash drive, or other USB peripheral to the USB A ports on the receiving unit. -
Page 6: Limited Warranty
If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco regarding warranty repair or replacement. -
Page 7: Liability Statement
LIABILITY STATEMENT Every effort has been made to ensure that this product is free of defects. The manufacturer of this product cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use. It is the responsibility of the user and installer of the hardware to check that it is suitable for their requirements and that it is installed correctly. - Page 8 Vanco International , LLC 506 Kingsland Dr., Batavia, IL 60510 Phone: 800-626-6445 • Fax: 630-879-9189 Web: www.vanco1.com...