Related Manuals for Vanco Evolution EVEXKVM3
Summary of Contents for Vanco Evolution EVEXKVM3
- Page 1 4K HDMI® EXTENDER W I T H K V M Vanco Part Number EVEXKVM3 4K HDMI® Extender with KVM www.vanco1.com • 800.626.6445...
- Page 2 DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters.
- Page 3 NVR/DVR, computer, NAS system, touch screen display, or other components that are controlled by USB with this extender. No need to run a separate line or extender just for USB control! Vanco’s patented bi-directional Power over Ethernet (PoE) Technology transmits power over Cat6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation.
-
Page 4: Specifications
SPECIFICATIONS HDMI ............... 2.0b HDCP ............... 2.2/1.4 Resolution ..............480i, 480p, 800x600, 720p, 1024x768, 1366x768, 1280x800, 1600x900, 1280x960, 1680x1050, 1080i, 1080p, 3840x2160@24/25/30/50/60Hz, 4096x2160@24/25Hz Supported Audio Formats ........... LPCM/DTS-HD/DTS-Audio/Dolby Digital 5.1 Input/Output HDMI Lengths ........up to 8m USB Version Supported ..........1.1 Transmission Distance .......... -
Page 5: Panel Descriptions
PANEL DESCRIPTIONS EVEXKVM3-TX (Transmitter Unit) 1. KVM LED Indicators: a. Left indicator led illuminates solid when the TX is connected to a source via USB b. Right indicator b.1. LED flashes when there is a connection between the TX and RX units b.1.1. - Page 6 PANEL DESCRIPTIONS EVEXKVM3-RX (Receiver Unit) 1. KVM LED Indicators: a. Left indicator led illuminates solid when lower USB port is connected to a USB peripheral b. Right indicator led illuminates solid when upper USB port is connected to a USB peripheral 2.
-
Page 7: Connection Diagram
CONNECTION DIAGRAM CONNECT AND OPERATE 1. Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI input of the Transmitting unit 2. Connect a display such as an HDTV or HD Projector or monitor to the HDMI output on the Receiving unit 3. - Page 8 EDID Extended Display Identification Data (EDID) is a data structure provided by a digital display to describe its capabilities to a video source (e.g. graphics card or set-top box). In a nutshell, the display provides its EDID info to the source to send the proper signal format, this is essential for a proper handshake to occur. The EVEXKVM3 is equipped with EDID management, however there is no need to adjust any dip switches or dials, the unit automatically reads the EDID from the display and saves it internally.
-
Page 9: Troubleshooting
4. If you are still encountering issues, attempt the “hot-plug concept. With all of the HDMI cables disconnected, turn on the source and plug in the HDMI cable into it’s output, then power up the Vanco unit and plug the HDMI cable into it’s input, finally turn on the display and plug the HDMI cable from the receiver into it. - Page 10 SAFETY AND NOTICE The EVEXKVM3 has been tested for conformance to safety regulations and requirements, and has been certified for EVEXKVM3 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. •...
-
Page 11: Limited Warranty
If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco regarding warranty repair or replacement. - Page 12 ® Vanco International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.com...