Page 1
HDMI®WIRELESS E X T E N D E R Vanco Part Number EVEXWHDMI HDMI® Wireless Extender www.vanco1.com • 800.626.6445...
Page 2
DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters.
FEATURES INTRODUCTION The EVEXWHDMI extends an HDMI signal wirelessly from a source to a display up to 656ft/200m using wireless technology. There are no cables that are required between the transmitter and receiver which makes for a clean and easy installation HDMI®...
PANEL DESCRIPTIONS TRANSMITTER RECEIVER 1. Power LED 1. Power LED 2. Data Transmission LED: Blinks slowly when 2. Data Transmission LED: Blinks slowly when connecting, Blinks fast once connected and connecting, Blinks fast once connected and transmitting transmitting 3. Connection Status LED 3.
CONNECTION DIAGRAM CONNECT AND OPERATE 1. Connect HDMI cable from a source into the HDMI IN port of the transmitter 2. OPTIONAL: Connect the provided IR BLASTER into the IR OUT port of the transmitter 3. Connect a HDMI cable from the HDMI OUT port of the receiver to a display or sink device 4.
IR FUNCTIONALITY The EVEXWHDMI is capable of routing IR from the display to the source(s). Due to possible differences in IR configuration and voltage, it is important that you use the IR cables that have been provided with the product to ensure compatibility TROUBLE-SHOOTING 1.
If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco regarding warranty repair or replacement.