Pneumatic arm dual ultrawide monitor desk mount (20 pages)
Summary of Contents for Vivo STAND-V200R
Page 1
Dual Ultrawide Vertical Monitor Desk Mount Instruction Manual SKU: STAND-V200R Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v200r GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
Page 2
WARNING! ASSEMBLY STEPS If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a STEP 1a - Clamp Installation qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury.
Page 3
STEP 3 STEP 1b - Grommet Installation Press Pole Cap (F) into Upper Pole (E), using the side without internal threading . Remove protective film from Pads (I) and apply them to the bottom side of Grommet Plate (H). Align the pin on top of Grommet Plate (H) with the small hole on the bottom of Lower Pole (D) and position the parts over the grommet hole.
Page 4
WARNING STEP 6 Slide monitors with VESA Plates onto VESA Brackets (B) and secure using M6x10mm Keep the displays positioned over the desktop within the arrow range shown. Thumbscrew (S-B). ADJUST AS DESIRED Use 6mm Allen Wrench (T-B) to loosen or tighten Monitor Bracket (B) tension. STEP 7 Use Cable Clips (G) to route cables.
Page 5
: 1HR 8M (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V200R and is the answer not in the manual?
Questions and answers