Step 6: Place rocks #6 into place as shown. Do not place
directly over the multiple porting areas.
Step 8: Place rock #3 and rock #1 into position as shown
to complete the setup. Lava rock is optional for placement
around the rock platform on the burner pan.
Note: If flame impingement on the rocks causes sooting, you may have to
move or remove one or more rocks. Do not place rocks directly over top of the
burner tube.
Step 7: Place rocks #4 into position as shown. Place the
highlighted rocks into position being sure that they are
crossing over the single line porting.
MQRSP5 finished setup and burn.
34