Table of Contents
Advertisement
STEP 3: Align the hole on the bottom of Log 3 with the
Log 3 placement tab and the rest Log 3 on Log 2 as
shown.
STEP 5: Fill in the rest of the burner pan and ember
plates with lava rock. Do not place lava rock on any of
the burner ports.
MQLOGC22 for MQZDV3318 / 3622 / ZCV3622
STEP 4: Place Log 4 into place as shown. Do Not place
directly over top of the multiple porting area on the left
side.
Finished log setup.
Finished log set is displayed with optional VLBIT6.
31
Advertisement
Table of Contents
