Table of Contents
Advertisement
WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts
Lava Rock
Rock Wool
Logs 1, 2, 3, 4
Parts List
Location Points
Place glowing rock wool on burner as shown in step 1
being sure to leave the multiple porting areas open. For
LP only, the multiple porting areas can be completely
covered.
Do not cover the Rear Porting areas with rock wool.
MQLOGC22 for MQZDV3318 / 3622 / ZCV3622
specifically approved with this appliance may result in property damage or personal injury.
NOTE: Log 1 is a two-piece assembly.
STEP 1: Place Log 1 onto the rear burner pan sliding it
left until it stops against the right burner mount.
STEP 2: Align the 2 holes on the bottom of Log 2 with the
2 Log 2 placement tabs as shown.
Log 1 assembled and ready for install.
30
Advertisement
Table of Contents
