Analog Output Status - Panasonic AFPXHEAD4 User Manual

Channel
CH7
● Regardless whether the mode is set to the RUN mode or the PROG. mode, an analog input is
converted to a digital value for the CH where the range setting is performed.

3.2.2 Analog Output Status

The analog output status of each output CH is stored in bits.
■
Applicable model
Model
AFPXHEDA4
AFPXHEA21
■
Analog output status
Bit OFF: Normal
Bit ON: Error
■
Operation of the analog output status error
An error is notified when the data stored in the analog output values CH0 to CH3 exceeds the
set output range.
While the error is notified, either the maximum or minimum value data is converted.
■
I/O allocation
Channel
CH0
CH1
CH2
CH3
WUME-FPXHAIO-01
Expansion location
1st unit 2nd unit 3rd unit
WX37 WX47 WX57
Expansion location
1st unit 2nd unit 3rd unit
X340 X440 X540
X341 X441 X541
X342 X442 X542
X343 X443 X543
3.2 Stored Data of the Input Contact (WX)
4th unit 5th unit
WX67 WX77
Channel
CH0 to CH3
CH0
4th unit 5th unit
X640 X740
X641 X741
X642 X742
X643 X743
6th unit 7th unit 8th unit
WX87 WX97 WX107
6th unit 7th unit 8th unit
X840 X940 X1040
X841 X941 X1041
X842 X942 X1042
X843 X943 X1043
3-7