Table of Contents
Advertisement
How to Set the Timer
(continued)
Stop Timer
Thermo Scientific
(3) Input RPM by dialing the knob. Press dial knob 1 time to save set
value and unit starts shaking. Remaining time and set value (RPM) shows
on display.
(4) During operation, you can check RPM by pressing RPM button.
Display returns to previous display in 10 sec.
(5)
Shaking stops and alarms when the time is terminated. If you press
dial knob or touch button, display returns to stand by status
Timer function can be stopped as follows;
STEP 1: Press the dial knob during operation.
STEP 2: Choose STOP YES by rotating the dial
knob to the clockwise.
STEP 3: Press the dial knob.
If you press dial knob or Timer button, the ending sound ends.
• Timer Mode can be cancelled in any step if the Timer button is pressed to get
back to standby mode. If the Timer button is pressed again, time or rpm can
be set.
• Timer Mode can be stopped as indicated above.
Turn right
Push Any Button
Section 4
Operation
MicroPlate Shaker
4-3
Advertisement
Table of Contents
