Table of Contents
Advertisement
Section 1
Warnings and Cautions
1-2
MicroPlate Shaker
Indicates a hazardous situation which, if not avoided, may result in minor or
moderate injury.
Do not put heavy things on the power line. Do not put the machine on
the line. It may take off the wire coating and cause electric shock or fire.
Do not touch it with wet hands and connect the main plug correctly. It
may cause the electric shock or injuries.
Install power outlet near instrument for convenience.
Do not install the stirrer near machinery generating high frequency noise.
Avoid installing near high frequency- welding machine, sewing
machine, and mass SCR controller.
Do not inject any liquid and inflammable things inside of product.
Do not pure water or put liquid on the top of the product when cleaning.
Intercept the main power immediately and request the service when water
may be in the product.
Do not let the product take any strong shock or vibration. It causes
abnormal operation or trouble. It may deteriorate the ability of the
product and not obtain correct results.
Do not sprinkle insecticide or flammable spray on the product. Use
smooth cloths. Cleaning with solvent can cause fire and deformity.
Power off while product cleaning. It may cause the electric shock or fire.
Disconnect the power plug if some sounds and burning smell, smokes
occur. And request service.
Do not let the product take shock by falling down. It will cause wrong
operation and malfunction.
Thermo Scientific
Advertisement
Table of Contents
