3.1.2
Installing the SSD Module
ITA-260 reserves the space for installing a 2.5" SSD module. Please refer to the fol-l
owing instructions to install the SSD.
1.
Place the SSD into 2.5" SSD holder, and lock it with 4 screws.
2.
Insert the entire assembled hard disk module into the chassis along the guide r
ail
(WxHxD):70x150x120mm with wall mount
(WxHxD):100x150x120mm with wall mount
ITA-260_Series User Manual
Figure 3.2 Installing the SSD Module
21