Installing The Hdd Module - Advantech ITA-1711 Series User Manual

Fanless embedded celeron dual core compact industrial computer

Hide thumbs Also See for ITA-1711 Series:

Table of Contents

3.1.3

Installing the HDD Module

ITA-1711 reserves the space for installing a 2.5" HDD module. Please refer to the fol-

lowing instructions to install the HDD.

Place the HDD into 2.5" HDD holder, and lock it with 4 screws.

The HDD holder has four semi-circles (two bigger and two smaller) on both

sides, which are used to place rubber cushions, with the black ones for bigger

semi-circles and transparent ones for smaller semi-circles.

Place the HDD holder onto HDD bracket, and secure it with four screws.

Connect the complete HDD module to the chassis and fix it with four screws.

Stick the cooling pad onto the PCB panel of HDD. Please align the cooling pad

with the magnetic head to protect the head from being covered.

ITA-1711 User Manual

Table of Contents