Download Print this page

Bort CoxaPro Instruction Manual page 14

Hip brace

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11
EN
5
Observe that, when closing both elastic restraints,
the legs are positioned neutrally to the direction of
movement during the further fitting process.
7a
Then, use your other hand to guide your fingers into the guide flap of the wide lower restraint and pull it
evenly around the thigh to avoid the formation of creases. Close the Velcro fastener flat on the outer side
of the brace casing. If necessary, smoothen it again. The wide strap can also be temporarily attached to
the knitted fabric Velcro fastener to simplify attachment.
8
14
6
Take hold of the affected side of the hip using the
designated finger flap on the side of the brace.
7b
Then, loosen the previously attached narrow elastic restraint from
the pelvis strap and also guide it around the thigh crease-free
under tension. Attach it again beneath the hip joint using Velcro.
Close the Velcro fastener evenly. To simplify this, the finger flap can
also be used here as required. Pay attention to tight fitting of the
Velcro fasteners.

Advertisement

loading

This manual is also suitable for:

201 400