Table of Contents
Advertisement
Paper guides that are too loose or too tight may cause misfeeds or paper jams.
5
Replace the paper cover.
●
When performing printing, open the paper stopper in advance so that the output paper does not fall out of
the output tray.
»
Continue to
When changing the paper size or type
●
The factory default settings for paper size and type are <A4> and <Plain>, respectively. If you load a
different size or type of paper into the machine, make sure to change the settings. If you do not change
the settings, the machine cannot print properly.
Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)
●
You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the
drawer, with the side to print face up (previously printed side face down).
- Load only one sheet of paper each time you print.
- You can use only the paper printed with this machine.
- You cannot print on the side that has previously been printed on.
- If you are using A5 size paper, the reverse side may not be printed correctly.
LINKS
Available Paper(P. 275)
Basic Operations
Specifying Paper Size and Type in the Drawer(P. 96)
91
Advertisement
Table of Contents
