Table of Contents
Advertisement
Configuring settings via the Remote UI
●
Start the Remote UI and log in to System Manager Mode. Click [Settings/Registration]
Management]
[Edit] and specify the necessary settings on the displayed screen.
●
By using the Remote UI, you can register a variety of information, including contact information,
Administrator comments, the installation location of the machine, as well as the settings that you can
register by using the operation panel. The registered information can be viewed on the [Device Information]
page of the Remote UI.
If a System Manager PIN is Set
●
If you try to access <Network Settings> or <System Management Settings>, the
following screen is displayed. Enter the set PIN.
●
Entering a PIN is also required when logging on in System Manager Mode in
the Remote UI.
Starting Remote UI(P. 160)
LINKS
Setting Access Privileges(P. 131)
Managing the Machine
Checking System Manager Information(P. 165)
133
[System
Advertisement
Table of Contents
