Default Settings - IBM TS4300 User Manual

IBM Confidential
Table 38. Locating Management functions (continued)
Task
SSL, enable or disable
Session Timeout
Time Zone, set
Unit Identification (UID), set
Unlabeled Media, allow
Users, Access recovery
Users, Modify User Passwords
Users, Modify Role Permissions
Users, Modify Operator Panel
PIN
Users, Add
Users, Remove

Default settings

The library is set to default settings when first purchased. Many of these settings can be customized.
Table 39. Default settings
Parameter
User Accounts
Administrator login
Local user accounts
User Account Settings
Operator Panel
Not available with this interface
Not available with this Interface
Not available with this interface
Not available with this interface
Not available with this interface
Configuration > User Accounts
Not available with this interface
Not available with this interface
Configuration > User Accounts
Not available with this interface
Not available with this interface
Default
User = administrator
Management GUI Password = adm001
Local Default Users = administrator
Number of Custom User = 0
Menu Navigation
Management GUI
Settings > Security > GUI > Secure
Communication
Settings > Security > GUI > Session
Timeout
Settings > Library > Date and Time >
Time Zone
Library > Actions > Turn Identifier
Light On or Off
Settings > Library > Advanced
Not available with this interface
Access > Local Users > Actions >
Modify User Passwords
Access > Local Users > Actions >
Modify Role Permissions
Access > Local Users > Actions >
Modify Operator Panel PIN
Access > Local Users > Add User For
information about different roles, see
Chapter 4, "Managing," on page 74.
Access > Local Users > Actions >
Remove User
Chapter 4. Managing 83
Configuration
Reset Default
Settings
NOT reset
x