Viewing The Alarms; Defining The Auxiliary Alarms - Munters Trio User Manual

NOTE Testing takes place at the scheduled time. If there is a delay for any reason (for
example, a power outage), the test will not take place more than five (5) minutes after
the scheduled time.

16.2 Viewing the Alarms

On the Main Menu bar, click
•
Click
•
required.

16.3 Defining the Auxiliary Alarms

The auxiliary alarm provides an additional method for adding alarm functions to specific
relays. This function compares the relay's current state to its defined state (normally open,
normally close). If the relay is not in its defined state, Trio sends an alarm. You can define
the auxiliary alarms to operate during specific time periods. Use this alarm for those relays
controlling important functions.

Define at least one sensor as an auxiliary input in Devices and Sensors.
1. Go to Control > Auxiliary Alarm
.
to acknowledge all alarms or acknowledge each one as
© Munters AB, 2020 109