Chapter 6. Analysis Of Common Problems - Kernau KSFP 611 MB Instruction Manual

CHAPTER 6. ANALYSIS OF COMMON PROBLEMS

Phenomenons
The machine suddenly stops
working during use.
Turning the gear knob machine
does not run.
Excessive noise when the
machine is running.
Causes
It may be that the machine
runs too long, or the ambient
temperature is too high,
resulting in the machine's motor
temperature being too high; the
machine starts the overheating
protection program, automatic
shutdown.
Check if the plug is in good
contact with the socket.
Check if the power is out.
Check if the rise button spring
back in place.
1. The machine will work louder
in high gear than in low gear.
2. The amount of food stirred
is too large, resulting in
overloading the machine.
3. Voltage is unstable.
4. Working time is too long.
22
Solutions
Gear reset to „0", unplug the
power, wait for the machine
to return toroom temperature
can be restarted (generally
need 15-30 minutes, the room
temperature varies cooling
time).
Verify that the power plug is
plugged into the outlet.
Wait for power before operating
Make sure the headstock is
stuck in place
1. Choose the right gear to
stir food according to the
recommendations in the manual
2. Reduce the amount of
stirring.
3. If the voltage is unstable,
wait for the voltage to stabilize
before using.
4. If the working time is too
long, stop and cool down for a
while before using.