Introduction; Quick Start Guide; Pre-Installation; Checkout - Bresser 7003800 Instruction Manual

1.1 Introduction

Thank you for selecting 24H 7-Day Forecast Multi-graph WI-FI Weather Station. This system
gathers many advance features for weather observer, such as ProWeatherLive (PWL) cloud
service which provide on-line weather forecast and condition of your area onto your console
while at the same time receiving your personal weather data upload to be viewed on PWL
website or PWL app anytime. The 7-in-1 professional wireless sensor-array integrates
temperature, humidity, wind, rain, UV and light sensors together, to continually monitoring your
local weather conditions at all time and transmit these data to your console through wireless
radio frequency technology. This system also support up to 3 thermo-hygro sensor(s) and other
advance optional sensor(s) such as water leak sensors and air quality sensors which include
PM2.5/10, CO2, HCHO/VOC level and CO wireless sensors, so you may monitor all your
environment condition in one system, one

1.2 Quick start guide

The following Quick Start Guide provides the necessary steps to install and operate the
weather station, and upload to the internet, along with references to the pertinent sections.
Step Description
1 Power up the wireless 7-in-1 sensor.
2 Power up the display console and pair with sensor.
3 Register your console at weather server proweatherlive.net to obtain
Station ID and key.
4 Open WSLink app to configure WI-Fl and finish setting up the console.
2.

Pre-installation

2.1 Checkout

Before permanently install your weather station, we recommend the user to operate the
weather station at a location which is easy to access to. This will allow you to get familiar with
the weather station functions and calibration procedures, to ensure proper operation before
installing it permanently.
app.
7
GB
Section
3.1.3
3.5, 3.6
5.1
6.1, 6.2, 6.3,
6.4(c1)