Api For Customized Weather Server; Calibration - Bresser 7003800 Instruction Manual

6.5 API for customized weather server

Apart from choosing WUnderground API that only covers the basic parameters shown on
Weather Underground, user may select WSLink API for full set of upload protocols that include all
the parameters shown on the console, including those of the optional sensors that are linked to it.

6.6 Calibration

Settings
Wi-Fi
Edit device
Weather server
Calibration
Firmware
Confirm & Exit
(a) Settings page
At the settings page, tap "Calibration".
Weather server
Other Server
URL
Station ID
Station key
Upload interval
1 minute
API type
WSLink API
WSLink API
MAC
AA: 11: BB: XX: YY: ZZ
Upload
Save
Calibration
Indoor
(Display Console)
Outdoor
(Sensor Array)
CH1
CH2
CH3
Other sensors
(b) Calibration page
1. Tap on the section where calibration is needed.
2. Tap "Unit" to change the unit if necessary before
entering the calibration value.
3. Tap "Save".
46
After you selected the
WSLink API type, a WSLink
API icon will be appeared
under API type section, you
may tap the icon to obtain
the full set of WSLink data
upload API document.
Unit
Indoor section
Outdoor section
Section for optional
thermo-hygro sensor(s)
(CH1 ~ CH3)
Section for other
optional sensor(s)
Save