Add Your Console To Wslink - Bresser 7003800 Instruction Manual

6.3 Add your console to WSLink

Open the WSLink app and follow the steps below to add your console to WSLink.
YOUR DEVICE
Add Device
(a) Your Device page
Tap "Add Device" icon.
Section 6.3.1
Setup new console with WSLink
Note :
- For first time connection of smart phone to the console Wi-Fi network, you need to acknowledge
any "no internet connection" notice when being prompted.
- If your smart phone cannot connect to the console, please turn off the mobile data / network in your
smart phone and try again.
SELECT DEVICE
(b) Select your device thumbnail.
DEVICE ADDED
PWS-XXYYZZ
(e) Once the console is added to
WSLink, the console icon will
appear on your device list. Tap it to
continue the setup.
42
ADD DEVICE
Check if the console is in AP mode
(AP icon flashing)
OTHERWISE
Press & hold WI-FI button for 6 sec
to enter AP mode
Operation completed
Confirm
(c) Ensure the console is in AP mode
and check the "Operation completed"
box, then tap "Confirm" to go to
system WI-FI network page of your
smart phone.
Wi-Fi
Wi-Fi
My Router
Connected
PWS-XXYYZZ
No encrypted
Room Router
Encrypted
John
No encrypted
(d) Select the console WI-FI
network name (the name always
begin with PWS-) to connect your
smart phone to the console. Then
tap back to WSLink app.